Day & Night Temperature & Relative Humidity Control - iGS-110: J

The iGS-110 temperature and relative humidity controller is essential to good climate control in a grow room or greenhouse. Good climate control is the cornerstone of a fast growing garden and is the first line of defense for pest and disease prevention. The display shows the ambient temperature (Celsius and Farenheit) and relative humidity values. The internal sensors benefit from a fast sampling rate due to the internal fan speeding up air samples. The control unit can be positioned up to 6 feet from the output box (a cable up to 50 feet can be used). Multiple operation modes are available and the differential of operation is adjustable. Optimize climate control and reduce energy bill : A priority of operation can be set between output #1 (temperature control) and output #2 (relative humidity control) thus inhibiting both outputs to run at the same time. Output #1 can also be set to operate on a cooling as well as a dehumidifying setpoint. Off-timers are also available (5 or 10 minutes) to maintain output state after the output priority ends. Check up on your climate set-up performance : The controller is constantly analyzing its performance and issues in the form of hint codes a report to the user. The percentage ratio of the ON time of each output is obtainable through the hint codes. Therefore you can have a good idea about your grow room performance in your absence. Customize controller work to your specific needs : Up to forty different operation modes are available which enables the user to fine-tune is control apparatus according to his needs. The same controller can be used for different tasks during the summer than during the winter. Technical Specifications : Battery-backed microprocessor control Power supply : 120 Vac Consumption : 100 mA 12 W Maximum load both outputs : 15 A 120 Vac RH Sensor and control range : 0%-100% Auto. differential adjustment : 3 to 10% Annual drift :